Network Wiring How To

Fryguy — Thu, 28 Jul 2011 19:35:47 +0000

Networking Wiring – oh the joys of needing a cable and not having one with you or the length that you need. I figured I would post up some info on how to make Ethernet cables, Cross-over Ethernet cables, T1/E1 cables, and cross-over T1/E1 cables. Here is a quick image of a RJ45 head with the pins numbered. [][1] When it comes to Ethernet cabling there are two common types – 568A and 568B – of wiring. The more commonly found one is 568B, but on occasion you will find 568A cabling in some older sites. The reason I want to mention both is because they come into play in a cross-over cable.

What's in my toolbag

Fryguy — Thu, 16 Jun 2011 17:56:32 +0000

This post is more of an informative post with regards to what tools I tend to use on a regular basis in my job. Recently, Stretch wrote about what was in his tool bag over on PacketLife.Net . He has some GREAT information over there beside just that post, so if you have never visited you should wander over there when you have time.

For the most part I tend to use the many of the same tools he discussed, but figured it would be nice to share what I have in my bag. So, without further typing, here we go!
Note: If you click on the pictures it will take you to a link to where you can either get the tool or a similar tool if the one I had is no longer availablee

This is probably my most used tool when I do not have to make cables. It contains just about every nut, bolt, and screw that you will find in a data center. It is easy to use, quick to find, and very versatile. No need to separate screw drivers or pliers, just grab this and you are good to go!

Loopback - Tag - Fryguy's Blog

Network Wiring How To

What's in my toolbag