Ok, now it is time for some L2VPN.  Here we will use the same diagram as before, but instead of providing MPLS VPN between CE1 and CE2, we are going to create a L2VPN so that CE1 and CE2 think that they are directly connected to each other. This lab builds off the previous post, so the routers where already configured.

First up, CE1
CE1(config-if)#int f0/0
CE1(config-if)#ip add 10.1.34.3 255.255.255.0
CE1(config-if)#int l0
CE1(config-if)#ip add 10.1.3.3 255.255.255.255
CE1(config-if)#router ospf 1
CE1(config-router)#net 10.0.0.0 0.255.255.255 a 0
CE1(config-router)#
Now CE2
CE2(config-if)#ip add 10.1.34.4 255.255.255.0
CE2(config-if)#int l0
CE2(config-if)#ip add 10.4.4.4 255.255.255.255
CE2(config-if)#router ospf 1
CE2(config-router)#net 10.0.0.0 0.255.255.255 a 0
CE2(config-router)#